(1) Appearance quality.
The appearance quality first requires the furniture countertop to be flat, fine workmanship, delicate decoration, and clear and beautiful texture. Room furniture usually uses particleboard, medium density fiberboard, blockboard, laminate, etc. as the substrate, using thin wood, wood veneer, and three plywood as cladding materials. Different substrate and cladding materials have different material properties. Uncertainty about the properties of the material and the correct method of use often leads to warpage of the panel. The structural characteristics of the cladding material on the back side of the panel must be the same or similar, and the moisture content of the substrate is generally required to be 6-10%. The materials selected are as close as possible to the batch. In the workshop processing, the time of loading and pressing machine should be shortened as much as possible, the material characteristics of different materials, the moisture content of different cladding materials, the different coating thickness, the pressing time and the pressure.
(2) Structural strength
Most of the furniture in the guest room is fixed furniture. The general structure is mainly plate type, wood screws, hardware connectors and adhesives are used as the joint method. When using materials, pay attention to different material properties, such as particleboard, medium density board, poor grip strength, avoid use in areas that require frequent activities or need strong nail holding power, such as door hinge screw parts, rail bottom rail The screw parts are easy to loose and produce sound. Special attention should be paid to the hardware parts of the bed screen and the frame wall to replace the reinforcement with wood.
(3) Material cost
When the requirements of the use are also met, the material with low cost should be used as much as possible, and the use of the bulk material should be paid attention to while using the same small piece of material to comprehensively improve the utilization rate of the plate. The room furniture is generally large in number, try to use the computer to reasonably discharge materials, and use large blocks and small blocks to reduce the material cost. Different structures should pay attention to the comparison of material costs.
(4) Efficient production
In the case of the same material cost, the material is easy to process, and the process can save the process cost and improve the efficiency, especially in the vertical milling, boring and milling, engraving processes, the material is easy to be processed and cut, and is easy to be smooth and tidy.
(5) Transportation installation
The hotel floor is generally high, requiring furniture to be light and easy to transport. In particular, some connected bed backs, some extended writing desks, elevators can not be transported, freight elevators are generally removed during the installation of furniture, how to transport safely, from the weight and structure of the material must be specially considered.