Do not use old clothes to wipe the furniture. It is best to wipe the furniture with absorbent cloth such as towels, cotton, cotton or flannel. Old cloths with coarse cloth, wired head or stitches, buttons and other scratches that cause scratches on the furniture surface should be avoided.
Wipe the dust to pay attention to details
Dust is made up of fiber, sand and bauxite. Many people are used to cleaning the surface of furniture with a dry rag. In fact, these fine particles have damaged the furniture lacquer in the rubbing of the back and forth. Suzhou Carlson Furniture recommends that although these scratches are minimal and even invisible to the naked eye, over time, the furniture surface will be dull and rough, and the light will no longer be.
Cleaning furniture precautions
Cleaning products such as soapy water and detergent can not only effectively remove the dust accumulated on the surface of the furniture, nor remove the sand particles before the lighting, and because they are corrosive, they will damage the surface of the furniture and make the paint of the furniture The face becomes dull. At the same time, if moisture penetrates into the wood, it will also cause mold or local deformation of the wood, reducing the service life. Nowadays, many furniture are made of fiberboard machine. If there is moisture infiltration, the first two years have not been completely evaporated because the additives such as formaldehyde have not completely evaporated. However, once the additive has evaporated, the moisture of the wet cloth will cause the furniture to become moldy. If the floor is low, the furniture in the house may be "mold" every year. Here, I would like to remind you that even if some furniture surfaces are made of piano paint, it can be properly scrubbed with water. Do not leave the wet cloth on the surface of the furniture for a long time to prevent moisture from penetrating into the wood.